Skip to content
Butt Weld Fittings | LeKe Piping
Products / Butt Weld Fittings

Industrial Piping Components

Butt Weld Fittings

Welded pipeline components for requirements where size, wall thickness, end preparation, material and the applicable standard must work together as one system.

Elbows · Tees · Reducers · CapsDimensions: confirm by standardMaterial: confirm per order
Request a QuoteExplore Technical Data
LeKe long radius pipe elbowLeKe large pipe reducerLeKe steel pipe teeLeKe pipe cap
System-led selectionReview geometry, schedule and connection details together.
Order-specific scopeMaterial and documents discussed per requirement.
Technical data pathMatch the relevant standard and dimensional series.
Clear RFQStart with sizes, schedules and quantities.

Product overview

Define the fitting around the welded piping system.

Butt weld fittings are specified through more than a product name. The fitting type, nominal size, pipe schedule or wall thickness, material grade, end preparation, standard and quantity should be reviewed together. This allows the supply scope to be clarified before production is committed.

Product families

Start with the connection geometry.

Technical data route

Confirm the dimensions that match the item.

Applicable standardState the project standard and the dimensional series for the fitting.
Fitting definitionState elbow angle/radius, tee type, reducer form or cap requirement.
Size & wallState NPS/DN plus pipe schedule, wall thickness or project requirement.
MaterialState the grade and relevant service requirements for review.
DocumentsList MTC, inspection, marking, packing and third-party requirements.

Procurement focus

What changes the selection.

Use the RFQ to show how the fitting works within the line, rather than submitting only a nominal diameter.

Connection layoutDirection, branch or transition geometry within the piping route.
Pipe compatibilityMating pipe size, wall thickness, schedule and end requirement.
Service requirementMaterial grade and any project-specific service considerations.
Supply requirementQuantity, destination, documentation, marking and packing needs.

Request for quotation

Send the facts needed to review the fitting.

Use your WordPress form, email link or WhatsApp button here.

Fitting typeElbow, tee, reducer or cap; include geometry where relevant.
Size / scheduleNPS or DN, plus mating pipe schedule or wall thickness.
Standard / materialApplicable standard, grade and service details.
Quantity / documentsQuantity, destination, MTC and inspection requirements.

Need a quotation?

Send your butt weld fittings requirement.

Include your fitting list, drawings or the key size and schedule details. LeKe Piping can review the required supply scope with you.

Request a Quote