November 14, 2026
Slip-On Flanges: Bore Fit, Welding and Dimensions
A slip-on flange fits over the outside of a pipe before it is welded in place. The pipe enters the flange bore, while the flange face provides the seating surface…
Read article →November 14, 2026
A slip-on flange fits over the outside of a pipe before it is welded in place. The pipe enters the flange bore, while the flange face provides the seating surface…
Read article →November 13, 2026
If you need a custom pipe bend, send the drawing with your enquiry. Mark any details that still need confirmation. A drawing lets you show the bend angle, radius and…
Read article →November 10, 2026
On this page What Is a Weld Neck Flange? The Flange Body, Tapered Hub and Bore How the Butt-Welded Connection Works Raised Face, Flat Face, Ring-Type Joint and Male/Female Faces…
Read article →November 9, 2026
ASME B16.47 covers large-diameter steel pipe flanges in sizes NPS 26 through NPS 60. This article summarizes its published scope, compares it with B16.5, and provides a historical table index…
Read article →November 8, 2026
LeKe Piping has published four product-specific RFQ checklists for flanges, butt weld fittings, steel pipe and forged fittings, with enquiry templates, examples and document requirements.
Read article →October 21, 2026
How does a weld neck flange take shape during machining? This short LeKe Piping workshop video follows selected operations, from flange blanks with machining allowance to turning and close-up views…
Read article →October 19, 2026
Learn how to read ASME B16.9 elbow, tee, reducer and cap dimensions with LeKe Piping drawings, selected metric tables and an ordering checklist.
Read article →July 29, 2026
Pressing Process for Stainless Steel Elbows: Cold Forming and Ordering Considerations In the pipe fitting industry, different manufacturing methods are selected based on material, size, application requirements, and cost considerations.…
Read article →July 26, 2026
Non-Standard Seamless Elbow Customization Case Study: Key Points on Processing a 2.1D 68×4 Special Multiple Elbow and Cost Considerations In pipeline engineering, standard elbows can meet the vast majority of…
Read article →